Custom Movable and Non-movable Arch Specifications
Non-operable : Sunburst (more light) Slatburst (less light) Blackout (no light)
Movable: Operable Slatburst
E-Series : Grooved (some light) Opaque (no-light)
MDF, (multi-density fiberboard) a durable engineered wood product. MDF is an epoxy-bonded wood fiber material resistant to warping, cracking and breakage.
American Arches are designed to mount outside the window opening (OM) with an overlap on the right, left and top of 11/8" for square sheetrock and 1 1/2" for rounded sheetrock. American Arches can be designed to mount inside (IM) the window opening and mounted by using an American Arch mounting strip. No brackets or nails required. For inside mounted arches the smallest dimensions are used to fit inside the window opening.
Minimum height is 9” (16” for operable) Maximum height is 1/2 of the width not to exceed 48”
Minimum width is 18” Maximum width is 96”(unlimited widths will be in multiple pieces), ALL arches greater than 59"in width will be in 2 pieces. All operable Arches over 48" may have a center support. Any arch can be manufactured to dimensions shown by checking the box make exact
Any custom arch can be manufactured to match existing, new shutters or trim widths
New shutters should be ordered with a top sill frame
All arches are painted to match current popular paint colors. Any Sherwin Williams paint colors can be matched. American Arches does not stain any product, but will match stain color as close as possible.
A free strike-off sample is available with paint colors on present material used.
All arches have pre-drilled mounting holes with supplied screws and button caps for easy mounting to sheetrock, molding or mounting strips. Supplied touch-up paint included. No brackets or nails required
All custom types are offered at the same price based on width size (height not to exceed ½ the width)
add 25% for Circles, Ovals and any other Polygon shapes) and have a unique flush mounting design, no product inside the window opening that insures a goof proof installation.
Templates are not required in most cases except for inside mounted arches. The American Arch mounting
strip is required or inside mounting at an additional cost. Check the box on order form Template
(note: American Arches does not hand cut to template, made to smallest size of template field trimming maybe be necessary
All mounting strips are cut to dimensions provided. American Arches will deduct 1/8” inch from all sides of arch to insure proper fit. Any alterations should be made to the mounting strip, not to the arch.
1½” wide (mounting strip) x ½” Thick. All mounting strips over 59" will be in 2 parts
Street side Backings are made from a 1/4" grooved Panel attached to the back of the arch so Blackout Rays will be seen from the street. Blackout Arches normally have a flat panel look on the back side. All Street Side Backings are at an additional cost.